|
|
|
97 Grand Caravan Transmission
|
|
|
| |
|
|
budman156
New User
Dec 22, 2014, 10:48 AM
Post #1 of 7
(1915 views)
|
|
97 Grand Caravan Transmission
|
Sign In
|
|
I have a 1997 Grand Caravan 3.3 Liter that does not shift into first, Once the car warms up the damn thing shifts and runs fine the rest of the day. I have replaced everything possible shift sensor, the solnoid pack, fluid and filter, Any thing I could have missed? 
|
|
| |
|
|
gsferraro
Veteran
Dec 22, 2014, 11:34 AM
Post #2 of 7
(1903 views)
|
|
Re: 97 Grand Caravan Transmission
|
Sign In
|
|
Do you have any codes present on this van. Gary
|
|
| |
|
|
budman156
New User
Dec 22, 2014, 6:36 PM
Post #3 of 7
(1892 views)
|
|
Re: 97 Grand Caravan Transmission
|
Sign In
|
|
Hey Gary thanks for the response, I have no codes on this issue.
|
|
| |
|
|
gsferraro
Veteran
Dec 22, 2014, 7:16 PM
Post #4 of 7
(1887 views)
|
|
Re: 97 Grand Caravan Transmission
|
Sign In
|
|
Question, Do you have a good scanner like snap-on? I would like to know the C.V.I's(clutch volume index)that would be under data.
One thing that comes to mind for this 2nd gear start is, there is a valve in the valvebody called the soleniod switch valve, when the valve is in one position it will give you first, in another postion will give you lock up, if this valve is hanging when the valvebody is cold in a partly stroked position you may have 2nd gear starts. There are also bore plugs same valve train that float in the bore as well, these plugs tend to stick or cock in the bore causing this problem as well. Just seems like a valve is hanging in the bore when cold but ok when hot. Gary
The last time i had a problem like this i disassembled a valvebody put it in my freezer to find the stuck valve.
|
|
| |
|
|
budman156
New User
Dec 23, 2014, 7:01 PM
Post #5 of 7
(1856 views)
|
|
Re: 97 Grand Caravan Transmission
|
Sign In
|
|
Thanks for the help. I will try removing the solinoid and see what I can come up with. I will keep you posted. Thanks again
|
|
| |
|
|
budman156
New User
Dec 23, 2014, 7:01 PM
Post #6 of 7
(1855 views)
|
|
Re: 97 Grand Caravan Transmission
|
Sign In
|
|
Also Gary I don't have a good scanner
|
|
| |
|
|
gsferraro
Veteran
Dec 23, 2014, 7:31 PM
Post #7 of 7
(1854 views)
|
|
Re: 97 Grand Caravan Transmission
|
Sign In
|
|
Hello,
This valve is in the valvebody, called solenoid switch valve and the bore plugs(should be 3 of them in a row) the valve has to be free free free. I use brushes to clean the bore until the valves falls into the bore under it owns weight. If you know someone with a scanner it would be nice to know what the C.V.I's are for this trans. Please let me know how it goes. Gary
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
