Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

Rodeo Transmission


  Email This Post



Coyote
User

Oct 6, 2016, 1:26 PM

Post #1 of 9 (1283 views)
Rodeo Transmission Sign In

I am removing a manual transmission from a 96 Isuzu Rodeo. I got it pulled back about a 1/2 inch and cannot go further. What am I doing wrong?

Thanks


gsferraro
Veteran

Oct 6, 2016, 3:30 PM

Post #2 of 9 (1275 views)
Re: Rodeo Transmission Sign In

Does it seem like it stuck at the bellhousing? Gary


Coyote
User

Oct 6, 2016, 4:47 PM

Post #3 of 9 (1269 views)
Re: Rodeo Transmission Sign In

No. the bell has cleared the engine by about a 1/2 inch maybe 3/4. I can stick a finger or thumb in between. I can wiggle the transmission and make a gap about 1 inch or more on one side with the other side touching the engine.


Coyote
User

Oct 6, 2016, 5:39 PM

Post #4 of 9 (1260 views)
Re: Rodeo Transmission Sign In

In fact, I can pretty much spin the transmission.


Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Oct 6, 2016, 6:39 PM

Post #5 of 9 (1255 views)
Re: Rodeo Transmission Sign In

Why are you pulling the transmission out? Something come apart in the bellhousing?





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.


Coyote
User

Oct 6, 2016, 6:41 PM

Post #6 of 9 (1253 views)
Re: Rodeo Transmission Sign In

I believe the rear engine seal has failed.


Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Oct 6, 2016, 6:53 PM

Post #7 of 9 (1248 views)
Re: Rodeo Transmission Sign In

It should pull right out. One possibility is the pilot bearing is stuck on the end of the input shaft and pulled out of the back of the crank. The pilot bearing diameter is bigger than the clutch disc input shaft hole.

You have this thing on a transmission jack? Can you get a boroscope up in there or maybe flash light and mirror to see what is going on?





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.

(This post was edited by Discretesignals on Oct 6, 2016, 6:56 PM)


Coyote
User

Oct 6, 2016, 7:38 PM

Post #8 of 9 (1244 views)
Re: Rodeo Transmission Sign In

I can get one on a day or two. I thought maybe the fork that operates the clutch should be pulled out. While messing around to see if it could pull out, I spun that in to an odd position. Is this one of those snap in type clutches?

In Reply To


Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Oct 7, 2016, 9:39 AM

Post #9 of 9 (1233 views)
Re: Rodeo Transmission Sign In

Watch this video:


https://www.youtube.com/watch?v=Sf0g1BzkDjI





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.






  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap