|
|
luke146
New User
Jul 14, 2013, 5:58 PM
Post #1 of 6
(1460 views)
|
I have a 96 town and country and put in a new starter,now my engine light stays on and says i have code 15.did i hit some wires or do i need sensors as my speedoimotor doesnt work and van stays in 2nd gear and its an automatic with some jumping when starting out.can anyone help me and tell me what to do and the cost.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jul 14, 2013, 6:17 PM
Post #2 of 6
(1456 views)
|
Retrace your work and see if you damaged or left something disconnected.
If everything looks ok, you should take it to a shop that has a high end scan tool that can access the transmission control module and see what codes it is storing.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Jul 14, 2013, 6:17 PM)
|
|
| |
|
|
luke146
New User
Jul 14, 2013, 7:25 PM
Post #3 of 6
(1427 views)
|
I did hit the battery cable and got a spark.could of i blew a fuse.they have some in the pcm box.dave
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jul 14, 2013, 7:29 PM
Post #4 of 6
(1421 views)
|
The battery cable from the starter to the battery isn't fused, so all it would do is make a bunch of sparks. It shouldn't have caused your problem unless you grounded it onto a an electrical device that has a chassis ground internally.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Jul 14, 2013, 7:30 PM)
|
|
| |
|
|
luke146
New User
Jul 14, 2013, 7:46 PM
Post #5 of 6
(1409 views)
|
i got a code 15 and says sensors should be replaced.are they hard to install.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jul 14, 2013, 8:01 PM
Post #6 of 6
(1408 views)
|
You should do a visual inspection of the vehicle speed sensor, its connector, and the wiring harness. 80% you can find what is wrong by just doing a visual inspection.
The sensor is located on the front of transmission near the shift solenoid pack. The sensor has light green/white and dark blue/black wires.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
multiple warning lights
Fiberglass body kit repair
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
