Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









clucth pedal lightly hard when press


Search for (search options)
 



fflores
New User

Apr 7, 2013, 11:10 AM

Post #1 of 4 (1496 views)
clucth pedal lightly hard when press Sign In

hi i have 2002 honda crv awd with 2.4 L,290km.the thing is when i press the clucth pedal is not really soft,is like little bit hard,i have a frend ang i try his clucth and is really soft,i already change the clutch fluid,could you help me to improve the softness of my clucth,thanks


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Apr 7, 2013, 12:29 PM

Post #2 of 4 (1467 views)
Re: clucth pedal lightly hard when press Sign In

No, you can't change that. That is inherent to the engineering of the system on that vehicle.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



Sidom
Veteran / Moderator
Sidom profile image

Apr 7, 2013, 1:42 PM

Post #3 of 4 (1458 views)
Re: clucth pedal lightly hard when press Sign In

Without being able to feel the pedal, I can't say if it's normal for that vehicle or not...With most Hondas, their pedals are usually pretty easy to depress since it's a hydraulic set up

If there is a problem in the clutch assembly, like the pressure plate going bad, this can cause more pressure being needed to push the pedal down....

If the pedal has always felt like this, then like HT said, it just design of the system. If this is something that has been slowing getting worse, then it's probably a sign that you are going to be needing a new clutch assembly soon...


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Apr 8, 2013, 5:38 AM

Post #4 of 4 (1431 views)
Re: clucth pedal lightly hard when press Sign In

Hmmm? Either normal for the vehicle or possible that pressure plate is more aggressive than another as Sidom suggested. Not so much with a hydraulic linkage but as a clutch wears the angle of the fingers on pressure plate do increase pressure required but doubt you'd notice that,

T







 
 
 






Search for (options) Privacy Sitemap