|
|
eyob07
User
Jan 31, 2015, 1:22 PM
Post #1 of 9
(1987 views)
|
hello everyone this is a 05 Montana, 3.4 engine the engine rpm goes high when the gas pedal is depressed but the car wont speed up as required, I,m assuming the transmission has some slippage, we are planing to replace the trans fluid and filter do you think that will help any ideas would be appreciated
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jan 31, 2015, 1:41 PM
Post #2 of 9
(1983 views)
|
|
Re: rmp goes high
|
Sign In
|
|
What is the transmission fluid level and condition? If the fluid is dark and smells burnt, good bet it is coming apart.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
gsferraro
Veteran
Jan 31, 2015, 2:21 PM
Post #3 of 9
(1976 views)
|
|
Re: rmp goes high
|
Sign In
|
|
Hello,
Question, do you have the same problem in reverse or is rev. ok? Gary
Trans in this vehicle is called 4T65E
|
|
| |
|
|
eyob07
User
Feb 1, 2015, 8:53 PM
Post #4 of 9
(1951 views)
|
|
Re: rmp goes high
|
Sign In
|
|
thank you for responding, ya the condition of the fluid was clear and the level was OK as well.
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Feb 1, 2015, 11:41 PM
Post #5 of 9
(1947 views)
|
|
Re: rmp goes high
|
Sign In
|
|
He also needs to know if your reverse is working properly or is slipping like your forward gears.
Do you mean the fluid was clean or the fluid was actually clear?
|
|
| |
|
|
eyob07
User
Feb 2, 2015, 2:31 PM
Post #6 of 9
(1930 views)
|
|
Re: rmp goes high
|
Sign In
|
|
thank you again, I mean the fluid was clean and not dark, to answer your question the car goes OK in reverse.
|
|
| |
|
|
gsferraro
Veteran
Feb 2, 2015, 4:43 PM
Post #7 of 9
(1924 views)
|
|
Re: rmp goes high
|
Sign In
|
|
Ok, if this has good reverse and slips going foward, that tells me that your 1-2 band is broken. This transmission also has an input or foward clutch, but the foward clutch is not the problem because not only is this clutch on in foward, its also applied in reverse. So being that you have good reverse, that gets ruled out. More than likely you have a problem with the 1-2 band which is common on these units. Gary
|
|
| |
|
|
eyob07
User
Feb 2, 2015, 6:18 PM
Post #8 of 9
(1916 views)
|
|
Re: rmp goes high
|
Sign In
|
|
thank you Gary, then in this case the transmission is going to be replaced. any way thank you for all the help.
|
|
| |
|
|
gsferraro
Veteran
Feb 2, 2015, 7:06 PM
Post #9 of 9
(1911 views)
|
|
Re: rmp goes high
|
Sign In
|
|
If you take it to a shop to be checked out, let me know what they say. gary
(This post was edited by gsferraro on Feb 2, 2015, 7:10 PM)
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
