|
|
skipin45
User
Oct 8, 2013, 5:55 PM
Post #1 of 11
(2300 views)
|
|
454 bb Timing question
|
Sign In
|
|
Does anyone know where to find the specs or know what to set the timing for a 1989 454 bb ,40 over it has a steel crank 4 bolt mains 800 edelbrock carb aluminum intake rearend has 308 gears th 350 trans th400 tork converter hurst promatic ratchet shift Hei ignition. This is all the guy gave me when I bought the car.
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Oct 9, 2013, 1:35 AM
Post #2 of 11
(2284 views)
|
|
Re: 454 bb Timing question
|
Sign In
|
|
Are you using a vacuum advance carb?
|
|
| |
|
|
skipin45
User
Oct 9, 2013, 4:47 AM
Post #3 of 11
(2278 views)
|
|
Re: 454 bb Timing question
|
Sign In
|
|
I don't believe so its a Edelbrock #1412 Carburetor, Performer, Gasoline, Square Bore, 800 cfm, 4-Barrel, Manual Choke, Single Inlet I believe
|
|
| |
|
|
skipin45
User
Oct 9, 2013, 3:07 PM
Post #4 of 11
(2267 views)
|
|
Re: 454 bb Timing question
|
Sign In
|
|
I was wrong it is vacuumed
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Oct 10, 2013, 1:21 AM
Post #5 of 11
(2260 views)
|
|
Re: 454 bb Timing question
|
Sign In
|
|
my bad, I mistyped. Your distributor has a vacuum advance on it right?
|
|
| |
|
|
skipin45
User
Oct 11, 2013, 6:51 AM
Post #6 of 11
(2239 views)
|
|
Re: 454 bb Timing question
|
Sign In
|
|
I believe so
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Oct 12, 2013, 1:08 AM
Post #7 of 11
(2231 views)
|
|
Re: 454 bb Timing question
|
Sign In
|
|
The 89 would've had a TBI and electronically controlled distributor, so here is the spec for an 86 with a 4 barrel carb.
IGNITION TIMING
1986 Chevrolet Truck C30 1 ton P/U 2WD 7.4L 4BL 8cyl
The Ignition Timing
Application:
With automatic transmission
8 DegreesBefore top dead center*Set at warm idle speed (700 RPM)*Distributor vacuum hose disconnected & plugged*Transmission in drive (parking brake engaged)*All accessories off
|
|
| |
|
|
skipin45
User
Oct 12, 2013, 7:11 AM
Post #8 of 11
(2224 views)
|
|
Re: 454 bb Timing question
|
Sign In
|
|
Thank you so much. Can I have the timing for the electronically controlled distributor also in case im wrong about it?
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Oct 12, 2013, 3:14 PM
Post #9 of 11
(2219 views)
|
|
Re: 454 bb Timing question
|
Sign In
|
|
You cannot set the timing on an electronically controlled system. The distributor can only go in one spot. If you are a tooth off, it will alter your timing and make it run badly. However, it would require the PCM for the TBI motor to even run and without having the TBI hooked up to it the PCM would have no idea what to do.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Oct 12, 2013, 5:09 PM
Post #10 of 11
(2218 views)
|
|
Re: 454 bb Timing question
|
Sign In
|
|
The base timing is always adjustable if it doesn't use a Crank sensor and an 89 would not use one.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Oct 12, 2013, 6:26 PM
Post #11 of 11
(2216 views)
|
|
Re: 454 bb Timing question
|
Sign In
|
|
If this is a EST HEI distributor, you need the computer to be able to control ignition advance. Even then the advance wouldn't be right because the characteristics of the engine have been changed. You really need a mechanical distributor or one that you can change the total advance on if your have completely eliminated the fuel injection system.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
