|
|
tonyp
User
Nov 30, 2013, 11:34 AM
Post #1 of 2
(1613 views)
|
replace water pump
|
Sign In
|
|
Ford Ranger 2000-v6-3.0 flex fuel 2wd. need advice to change/replace water pump.
(This post was edited by tonyp on Nov 30, 2013, 11:35 AM)
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 30, 2013, 11:48 AM
Post #2 of 2
(1602 views)
|
Re: replace water pump
|
Sign In
|
|
Removal - Disconnect the battery ground cable.
- Remove the air cleaner outlet tube.
- Remove the fan blade and the fan shroud.
- Disconnect the water bypass tube.
- Remove the accessory drive belt.
- Remove the bolts and the water pump pulley.
- Remove the bolts from the A/C compressor mounting bracket.
- Disconnect the lower radiator hose.
- Remove the bolts and position the bracket and compressor aside.
- Remove the bolts and remove the water pump.
- Clean the sealing surfaces.
Installation - Install the water pump.
- Install the A/C compressor mounting bracket.
- Install the A/C compressor mounting bracket.
- Install the water pump pulley.
- Install the accessory drive belt.
- Connect the heater hose.
- Connect the lower radiator hose.
- Install the fan blade and fan shroud.
- Install the air cleaner outlet tube.
- Connect the battery ground cable.
- Fill the cooling system.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
| | |
|