|
|
|
1982 Ford F100 Clutch problems
|
|
|
| |
|
|
classiccowboy
New User
May 10, 2011, 5:35 PM
Post #1 of 8
(4158 views)
|
1982 Ford F100 Clutch problems
|
Sign In
|
|
I have a 1982 Ford F100. It's a Manual Transmission. The sticker under the hood says 3.8L V6, but the clutch kit on there is for a 4.9L. I don't know if that will make any difference with my question, but we'll find out soon enough.
Last summer, I had to put a new clutch kit in my truck, cause the throw out bearing went out. Before the throwout bearing, I had no problems with my clutch. But once I changed the kit, I started having problems with another component in my clutch system. Somewhere between the clutch peddle, and the point where it goes into the bell housing is a ball and socket type anchor point. Two ball points on either end of this pivot. There's one attached to the bell housing, and one that bolts to the frame of the truck. The point that is bolted to the frame is worn down to the point that it keeps popping off. It has happened sometimes just while I push in the clutch to start the truck. And sometimes as inconvenient as when I'm driving down the road, pushing the clutch to change gears. for a while I had some rope tied around it to keep it from coming off. Which was working, but I didn't want to keep it like that forever. So I bought some Quick Steel at O'Reileys, which was said to be pretty good stuff for this kind of work. I applied the quick steel, and after only a day or two I started noticing that my clutch was feeling the same way it did when I had the rope on it. So I looked and the quick steel had broke off. I applied some more, this time filing some grooves into the ball, kind of as a way to give it something to hold on to. But by the time I got it two miles, it broke off again. This time I'm letting the quick steel harden over night before putting the bracket back on my truck, but incase this time it doesn't work, what else can I do?
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
May 11, 2011, 7:47 AM
Post #2 of 8
(4135 views)
|
|
Re: 1982 Ford F100 Clutch problems
|
Sign In
|
|
I'm not exactly sure what item you are fighting with? Have you asked a Ford dealer if parts are available? I doubt the quick steel is going to work or not for long,
T
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 11, 2011, 8:56 AM
Post #3 of 8
(4131 views)
|
|
Re: 1982 Ford F100 Clutch problems
|
Sign In
|
|
If this is a rod mounted between the frame and the bellhousing, then you need to look hard at broken motor mounts and engine movement.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
classiccowboy
New User
May 11, 2011, 4:52 PM
Post #4 of 8
(4123 views)
|
|
Re: 1982 Ford F100 Clutch problems
|
Sign In
|
|
is there any possible way to upload pictures on here so I can maybe just take a picture and show y'all?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 11, 2011, 4:54 PM
Post #5 of 8
(4120 views)
|
|
Re: 1982 Ford F100 Clutch problems
|
Sign In
|
|
You have to upload them to an external image hosting sight and they will supply a link that you can post here so the pictures show up here.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
classiccowboy
New User
May 11, 2011, 6:30 PM
Post #6 of 8
(4117 views)
|
|
Re: 1982 Ford F100 Clutch problems
|
Sign In
|
|
Like Flikr or something?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 11, 2011, 6:35 PM
Post #7 of 8
(4115 views)
|
|
Re: 1982 Ford F100 Clutch problems
|
Sign In
|
|
I'm not familiar with flickr but Photobucket or image shack are common ones.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
May 11, 2011, 6:49 PM
Post #8 of 8
(4112 views)
|
|
Re: 1982 Ford F100 Clutch problems
|
Sign In
|
|
People have luck using Photo Bucket for pics. They would help about now,
T
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Strut spring orientation and strut mount tension nut
