Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN






1994 Yukon Lower Ball Joint Replacement


Search for (search options)
 



sirjr
Novice

Apr 27, 2007, 1:12 PM

Post #1 of 2 (6120 views)
post icon 1994 Yukon Lower Ball Joint Replacement Sign In

I have to replace the lower ball joints in my 1994 GMC Yukon 4WD. Has anyone done a job like this to offer me any help/insight regarding this repair. I know I will have to purchase a special tool to press out the old ball joints and press in the new ball joints. Other than that, any instructions/directions will be appreciated. Steve


(This post was edited by Tom Greenleaf on Apr 27, 2007, 1:54 PM)


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Apr 27, 2007, 2:42 PM

Post #2 of 2 (6110 views)
Re: 1994 Yukon Lower Ball Joint Replacement Sign In

Hi - I moved the post from Heating and A/C for better exposure.
___________________________________

Just looked at my 3/4 ton 1997 4X4 which could be the same deal as yours. Looks like a bear!! I know the stabilizer pins are a total pest and big bucks too just to buy them - I was shocked!

You will need HD tools and you might be able to press out and in the joint with a bench vice and the right size pipe but you have to know just where to push or things get damaged. You want the right grade of stuff if it takes a lot of force. Machine shops and some shops have this press and for the very few times I've ever needed one that strong I took the parts to friends shop for that part of the job.

I grease all greasable joints on all my own cars and customers with synthetic grease and only once had to replace a front end joint of any kind that was good when I first started to care for the car/truck. This front end is a pest to grease and I'd bet some places that do regular grease and oil jobs skip a couple fittings. You even have to steer the car to get at one on the center link with most grease guns.

I think you can buy the lower control arm with the joint already in it -- that was the only way I could get a new control arm for an old Cutlass RWD.

In short: Yes you can do it if you have the heavy duty tools,

T







 
 
 






Search for (options) Privacy Sitemap