|
|
|
Bad break pressure after changing lines
|
|
|
| |
|
|
help4frank
Anonymous Poster
f4mypig4t@hotmail.com
Jul 18, 2009, 9:56 AM
Post #1 of 8
(3992 views)
|
|
Bad break pressure after changing lines
|
Sign In
|
|
I have a 1998 chevy s10 pick up with a 2.0 and approx. 140.000.My brakes went out and I replaced all the way from the front to the back.I also replaced the wheel cylinders. I have bleed the brakes and have a good flow,but still don't have good pressure.The guy at the auto store said my proportion valve may need to be reset.I don't see one, and am stumped.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 18, 2009, 10:05 AM
Post #2 of 8
(3985 views)
|
|
Re: Bad break pressure after changing lines
|
Sign In
|
|
A couple of things could have happened here
Many times when there is a brake failure, it allows the brake pedal to go to the floor which the allows the master cylinder piston to travel into parts of the bore where it usually doesn't travel. This area usually has some corrosion or pitting in the bore which damages the rubber seals and ruins the master cylinder.
Another possibility is having the wrong wheel cylinders putting the bleeder on the bottom and trapping air in the cylinder that can't be bled.
The third possibility is still having air trapped in the ABS unit. This sometimes requires a scan tool to electronically bleed it internally.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
help4frank
Anonymous Poster
f4mypig4t@hotmail.com
Jul 20, 2009, 12:55 AM
Post #3 of 8
(3971 views)
|
|
Re: Bad break pressure after changing lines
|
Sign In
|
|
Thanks for the help, I appreciate it. I know its not the cylinders, but how would I know which of the other two it could be? I would think that if it was pumping it thru, that it wouldn't be the master cylinder, but you seem to know more about it.Thanks again for your help.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 20, 2009, 3:13 AM
Post #4 of 8
(3966 views)
|
|
Re: Bad break pressure after changing lines
|
Sign In
|
|
What do you mean by "good pressure".
Is it a problem with the pedal feel or the stopping power?
What does the pedal feel like?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
help4frank
Anonymous Poster
f4mypig4t@hotmail.com
Jul 20, 2009, 5:21 AM
Post #5 of 8
(3962 views)
|
|
Re: Bad break pressure after changing lines
|
Sign In
|
|
It won"t hold pressure.It seems okay when the truck is off, but the minute I start it, it is soft and goes to the floor.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 20, 2009, 6:51 AM
Post #6 of 8
(3957 views)
|
|
Re: Bad break pressure after changing lines
|
Sign In
|
|
You just don't have all the air out yet. You probably have some air trapped in the ABS unit and it may require a factory scan to to bleed it internally.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
help4frank
Anonymous Poster
f4mypig4t@hotmail.com
Jul 21, 2009, 10:05 AM
Post #7 of 8
(3952 views)
|
|
Re: Bad break pressure after changing lines
|
Sign In
|
|
It has me stumpped big time now. I went to move my truck to get another car out, and everything seems fine.I have breaks, they aren't soft, it's just like before the line busted.I have really appreciated your help, thanks,
Frank
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 21, 2009, 10:09 AM
Post #8 of 8
(3950 views)
|
|
Re: Bad break pressure after changing lines
|
Sign In
|
|
Yes, the ABS unit bled itself out.
I have had GM vehicles that we have spent an entire day and gallons of fluid trying to bleed an ABS unit out and then suddenly it's bled with no warning.
Sometimes I take them out and slam on the brakes in a gravel surface and when the ABS activates, it bleeds itself out them.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
