|
|
jet
Anonymous Poster
johnt49@verizon.net
May 25, 2009, 4:44 AM
Post #1 of 2
(2062 views)
|
I have a 91 Ford 5.0 that will not fire. Have power to the coil, have changed the module on the distributor and the coil. We even took a distributor from a running engine and installed. Still no fire.
We do not have a dianostic device just information from a manual. We did check to see if this year had a crank sensor and we have not found one.
your assistance would be helpful........
Thanks,
John johnt49@verizon.net
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
May 25, 2009, 7:31 PM
Post #2 of 2
(2052 views)
|
For the moment just wonder how you are checking for "spark?"
The 5.0 is a pretty straight forward engine. Modules are common and pickup coil inside is rare to me but possible. You can get a salvage yard whole dist for peanuts here at least. It would be a first for me but the pick up coil is suspect. hard to do with with an older distributor as a roll pin is involved and the important sleave is a pest to get off shaft without breaking it
A maybee for the prob at hand right now
T
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 