|
|
|
1977 f250 with 400 engine wont turn over
|
|
|
| |
|
|
jackj65
Novice
Jan 30, 2013, 5:16 PM
Post #1 of 8
(4640 views)
|
|
1977 f250 with 400 engine wont turn over
|
Sign In
|
|
Had to jump to start. Replaced battery starter regulator selinoid now it wont turn over even with a jump but i have power.1977 f250 custom with the 400 engine[mad]
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jan 30, 2013, 5:22 PM
Post #2 of 8
(4635 views)
|
|
Re: 1977 f250 with 400 engine wont turn over
|
Sign In
|
|
Does the fender mounted solenoid clack when you attempt to crank the engine?
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
jackj65
Novice
Jan 30, 2013, 6:15 PM
Post #3 of 8
(4594 views)
|
|
Re: 1977 f250 with 400 engine wont turn over
|
Sign In
|
|
No
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jan 30, 2013, 6:17 PM
Post #4 of 8
(4591 views)
|
|
Re: 1977 f250 with 400 engine wont turn over
|
Sign In
|
|
You replaced the solenoid. Did you get all the wires back in the correct place?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
jackj65
Novice
Jan 30, 2013, 6:18 PM
Post #5 of 8
(4584 views)
|
|
Re: 1977 f250 with 400 engine wont turn over
|
Sign In
|
|
Yes doubled and triple checked
|
|
| |
|
|
re-tired
Veteran
/ Moderator
Jan 30, 2013, 7:48 PM
Post #6 of 8
(4568 views)
|
|
Re: 1977 f250 with 400 engine wont turn over
|
Sign In
|
|
buy a test light . test for power one of the large posts. when key is turned to start see if power is on small post. post back
LIFE'S SHORT GO FISH
|
|
| |
|
|
jackj65
Novice
Jan 30, 2013, 7:49 PM
Post #7 of 8
(4565 views)
|
|
Re: 1977 f250 with 400 engine wont turn over
|
Sign In
|
|
Will do
|
|
| |
|
|
jackj65
Novice
Feb 1, 2013, 3:11 PM
Post #8 of 8
(4514 views)
|
|
Re: 1977 f250 with 400 engine wont turn over
|
Sign In
|
|
The selonoid was good but one of the bolts holding it on wasnt grounding, on the firewall where one of the two bolts went.had a small crack in it and thats why it wouldnt ground. I welded the crack and put in new bolts and it fired right up. I could not have figured it out without your help.thanks for being there for me.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Strut spring orientation and strut mount tension nut
