|
|
|
95 ford ranger wont start
|
|
|
| |
|
|
nshort402
New User
Mar 2, 2013, 5:55 PM
Post #1 of 8
(3796 views)
|
95 ford ranger wont start
|
Sign In
|
|
i have a 95 ford ranger and i was driving it home and it just died it has an orange spark it tries to fire but wont the fuel pump is new i hear it kickin in but idk what to do any advise
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Mar 2, 2013, 6:07 PM
Post #2 of 8
(3772 views)
|
|
Re: 95 ford ranger wont start
|
Sign In
|
|
Check for injector pulse with a noid light and check the fuel pressure with a gauge. Hearing it kick on means nothing. Neither does being new. I've seen some new ones bad out of the box. Orange spark isn't that great either. Should be bluish white and able to jump about 1- 1 1/2 inches from the coil to a test light.
|
|
| |
|
|
nshort402
New User
Mar 2, 2013, 6:30 PM
Post #3 of 8
(3763 views)
|
|
Re: 95 ford ranger wont start
|
Sign In
|
|
yea theres a ground on the back of the motor that isnt hooked up i just saw that idk how bad that will effect it i put some gas down the intake to see if it would fire still wont
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Mar 2, 2013, 7:45 PM
Post #4 of 8
(3742 views)
|
|
Re: 95 ford ranger wont start
|
Sign In
|
|
is this the 3.0L or 4.0L? Orange spark isn't good. As Nick stated you need to have a hotter spark.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Mar 3, 2013, 8:01 PM
Post #5 of 8
(3717 views)
|
|
Re: 95 ford ranger wont start
|
Sign In
|
|
You already know you have at least one broken ground. Try taking a jumper cable to a shiny piece of the engine and the other end to battery ground. See if this improves your issue. If it does you simply need to make a ground cable from the block to the battery.
|
|
| |
|
|
delfinashley
User
May 22, 2013, 1:20 AM
Post #6 of 8
(3580 views)
|
|
Re: 95 ford ranger wont start
|
Sign In
|
|
Take a long wire and strip both end run one from da batt to the +side of the ignition coil with the fitting and c provided that it will begin then provided that it does u can put that wire to a fuse that has power when u turn on the key.
|
|
| |
|
|
HT
User
May 22, 2013, 3:30 AM
Post #7 of 8
(3576 views)
|
|
Re: 95 ford ranger wont start
|
Sign In
|
|
delfinashley .............. don't post that crap in here.
OP please ignore his stupid advice.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
May 22, 2013, 5:14 AM
Post #8 of 8
(3571 views)
|
|
Re: 95 ford ranger wont start
|
Sign In
|
|
Still need to know the engine size.
You can test power to the coil(s) with a volt meter back probed into the coil('s) connector on the feed circuit with the key on and the meter grounded to the battery. You should have close to battery voltage. No need to run jumper wires and possibly cause problems.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on May 22, 2013, 5:15 AM)
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
