|
|
96 blazer vortch head removal
|
|
|
| |
|
musanj
New User
Aug 18, 2013, 5:37 PM
Post #1 of 9
(3876 views)
|
96 blazer vortch head removal
|
|
|
is there any way to remove the headson a 96 blazer v6, without fully removing the exhaust manifolds. possibly disconnecting system from muffler? unbolted manifolds from the heads, but need that extra inch or so to get the bottom row of bolts on thehead.
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 19, 2013, 2:41 AM
Post #2 of 9
(3856 views)
|
Re: 96 blazer vortch head removal
|
|
|
What's so hard about removing a couple of flange nuts to get the manifolds out of the way? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
musanj
New User
Aug 19, 2013, 3:01 AM
Post #3 of 9
(3854 views)
|
Re: 96 blazer vortch head removal
|
|
|
Accessability is key, I'm working in my driveway on jack stands. Trying to get the right combination of tools and the leverage.space is too tight and awkward to get a torch up in there to heat the studs.
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 19, 2013, 3:04 AM
Post #4 of 9
(3853 views)
|
Re: 96 blazer vortch head removal
|
|
|
Hence, the reason we have repair shops equipped with lifts. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Aug 19, 2013, 5:55 AM
Post #5 of 9
(3844 views)
|
Re: 96 blazer vortch head removal
|
|
|
Quote ">> Trying to get the right combination of tools and the leverage.space is too tight and awkward to get a torch up in there to heat the studs.<<" Sounds like by the time you acquire everything needed for obstructions, near always stuck and rusted stuff with exhaust there, and chance of breaking whatever fasteners needing extracting and the tools for that this will cost you a lot more than sending this out to a shop that has all that is needed already, T
|
|
| |
|
musanj
New User
Aug 19, 2013, 10:10 AM
Post #6 of 9
(3829 views)
|
Re: 96 blazer vortch head removal
|
|
|
Well if I could go put it on a lift don't you think I would've done that already? I was looking for an answer not a smart ass remark. Thank for the lack of help though, mission accomplished.
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 19, 2013, 12:04 PM
Post #7 of 9
(3825 views)
|
Re: 96 blazer vortch head removal
|
|
|
You know, I don't have the equipment at home for open heart surgery either so you know what I do? I leave it to the doctor to do because HE is equipped and trained to do the job. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
musanj
New User
Aug 19, 2013, 9:01 PM
Post #8 of 9
(3812 views)
|
Re: 96 blazer vortch head removal
|
|
|
Unlike a lot of other backyard mechanics, I feel that 28 years of experience, though not having to pay for it, qualifies me as able to do the job. For all those out there,there is no short cut, which I was looking for. Broke three studs, but the job was accomplished.. Heads are at the machine shop as we speak.No hard feelings, have a good night.
|
|
| |
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Aug 20, 2013, 3:40 AM
Post #9 of 9
(3770 views)
|
Re: 96 blazer vortch head removal
|
|
|
Good for you and good luck with the fix of broken studs. I apologize on my part for thinking you would end up spending a fortune on tools for obstruction some of which are shockingly expensive such that if for one time use may never be worth it to own. Well I guess thread is locked to archives. You can reach folks be PM (private messages) just click on the user name to see if that is enabled by that person. Good luck, Tom
|
|
| |
|