Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN






No power and misses like crazy


Search for (search options)
 



valleybusman
User

May 25, 2013, 10:36 PM

Post #1 of 2 (3025 views)
No power and misses like crazy Sign In

I have a 2006 Ford E 450 chassis.A couple weeks ago the truck was making deliveries.I get a cal it's running hot.Driver pulls over and shuts truck off,I pick up truck and bring back to the shop.I use a Genisys 3.0 and it says it can't communicate with the fan.Sure enough fan wires are cut by fan . I install a new fan and think it's fixed and no more work.I take truck out for a test drive.Everything is great !!!I start back for the shop and it happened.I heard a loud explosion and lose power.I limp truck back to shop.I use my scan tool and it says no turbo boost code 2262.I check all the connections and hose thinking one blew off everything is good .I think map sensor.I change it out and nothing.I think turbo and pull the turbo.I break the turbo open and the VGT unison ring is stuck,fingers on exhaust side or also frozen and rusty.So I replace the turbo hoping it's fixed .Well guess what same thing as before.I use my scan tol again and this time I have 2262 code and now a 2263 code.I did find if I don't put my foot into it and keep the RPM's down below 2000 truck will run great.Once it gets over 2000 it misses,jerks and smokes blue.I cleaned the EGR what should I look at or does it need to go to a ford garage ?Thanks


Derekjfarrington
User

Dec 14, 2013, 2:02 AM

Post #2 of 2 (2777 views)
Re: No power and misses like crazy Sign In

this thread is now aged... what did you find?






 
 
 






Search for (options) Privacy Sitemap