Dynamometers:A Brief Overview

Dynamometers: A Brief Overview
Dynamometers can be used to determine virtual road loading of engines and full powertrain and are capable of testing for a variety of engine development activities, including:

• Calibration of engine management controllers
• Detailed investigations into combustion behavior
• Power and torque measurements

Dynamometers: Functionality
Each dynamometer is designed to measure the following characteristics:

• Torque
• Rotational speed
• Power output of a combustion engine, electric motor or other power source.

Dynamometers: Two Types
In addition to classification as absorption, motoring or universal, most dynamometers are classified in one of two categories:

• 1. Engine dynamometers are designed for coupling directly to the driveshaft of an engine under test.
• 2. Chassis dynamometers measure the power output of a drive train by using rollers turned by the tires of a vehicle under test.
In addition to the two traditional dynamometer, select companies offer portable dynamometers that attach directly to the flywheel of an engine. This allows accurate measurement of engine output without removal of an engine from its drive train.

Dynamometer Designs
From simple power display systems with manual control to completely automated testing solutions, there is an electronic motor testing system to meet your testing requirements.

• Eddy current dynamometers: harness the magnetic flux between fixed and rotating electromagnets spun by the engine under test.
• Powder dynamometers: create flux through the application of a fine magnetic powder between the rotor and coil.
• Electric Motor Testing Systems: Electric Motor Testing Systems are designed to provide maximum reliability, excellent durability and performance; available for testing electric motors from 5 to 4,250 hp.
• Fan, hydraulic and water brakes: use air, water or hydraulic fluid to provide an indication of the power applied to the system

Chassis Dynamometers
Chassis dynamometers serve to quickly identify service issues such as low horsepower, overheating, emissions compliance and speedometer accuracy. Once identified and repaired, the chassis dynamometer will verify the problem is corrected and can be used to perform engine break-in after rebuild.
Accessories

• Exhaust Systems
• Guard Rail Stone
• Guard Wheel
• Chocks Cooling Fan
• Calibration Weights

Engine Dynamometers - The Complete Diagnostic System
Engine dynamometers offer the most innovative engine diagnostic tools today, supplying solutions to troubleshoot problems such as low horsepower, insufficient torque, and leaks.
Engine dynamometers are also capable of indicating and verifying:

• Repair is complete
• Engine is operating according to specifications
• Ready to break-in engines before installation
Engine dynamometer product lines include: Water Brake Style Engine Dynamometers, Portable Dynamometers, Eddy Current Dynamometers, and AC Dynamometers.

Towing Dynamometers
From light passenger cars to heavy commercial truck vehicles, power is transmitted through a drive shaft to a two speed transfer case with a neutral clutch. Four electric brake retarders are attached to the output shaft of the transfer case which is controlled by in-cab instrumentation inside of the testing environment. Power on the retarders is converted into a DC voltage through the power controllers located in the control cabinet.

Water Recirculating System
It can be used with any style engine dynamometer or chassis dynamometer. One system can serve several engine dynamometer or chassis dynamometer systems if sufficient capacity is designed into the system. Water Recirculating Systems are custom engineered for moderate to high volume engine dynamometer or chassis dynamometer users, and require a below grade sump or an above ground tank.
Benefits of Using a Water Recirculating System with your Dynamometer:

• Reduced dynamometer operating costs through water conservation
• Reduced dynamometer maintenance costs with controlled, high-quality water supply
• Easier clean-up: materials discharged by evaporation as opposed to drainage
• Ensure proper dynamometer performance by maintaining water pressure, volume, and cooling




Automotive Articles - Related Articles

1. Career Growth for Automotive Technicians
2. Traveling With Kids Be Car
3. Secrets Of What's Driving American
4. Best New Vehicles To Fit
5. A New Take On Raising
6. NASCAR Debuts Gen-6 in Daytona
7. Lack Of Public Funds Will
8. The 5 Best Cars From
9. Car-safety Tips To Keep Your
10. Series Celebrates A Love Of
11. How To Make Moving Easier
12. Smart Tips To Help Business
13. Prepare Your Vehicle To Help
14. How Automotive Technology Lightens The
15. Distracted Driving Laws Quickly Changing
16. Ford's New Lane Keeping System
17. Put Your Old Car On
18. When Buying A Booster Seat,
19. Ford's New Police Interceptors
20. Truckin' Toward Economic Recovery