Over time, these additives wear out, lessening their ability to protect vital engine and cooling system metals against rust and corrosion. Your vehicle owner's manual will provide antifreeze usage specifications.
"Inspecting and maintaining your vehicle's cooling system takes just a few minutes of your time, but it is well worth it when you consider what could happen," said Rich White, executive director of the Car Care Council. "Cooling system failure is the leading cause of engine related breakdowns, which can cost thousands of dollars and leave you and your family stranded at the worst possible time."
To check the level of antifreeze, you will need a few basic service tools and an antifreeze ball tester, which is available at auto parts stores.
Always make sure the engine and coolant system are cool before you begin. Opening a hot radiator or coolant reservoir can cause severe burns. If the antifreeze is low, add a 50/50 mix of approved antifreeze and distilled water. If you changed your antifreeze recently, but your level is low, use the antifreeze ball tester to make sure the antifreeze-to-water ratio is correct.
This is also a good time to inspect and replace any bad cooling system hoses. Check for leaking, brittle, spongy, cracked or rotted hoses and make sure that the radiator hose clamps are tight to prevent leaks at the connections.
If you're unsure about any aspect of cooling system service, have your car inspected by a professional service technician. Checking your vehicle's cooling system today will ensure that it's ready for the long winter ahead.
To obtain a free service interval schedule, visit the Car Care Council Web site at www.carcare.org.
