|
|
cracka29
New User
Aug 18, 2009, 6:18 AM
Post #1 of 3
(1981 views)
|
trouble cods
|
Sign In
|
|
1988 olds 88 with 3.8v6 codes 26,39,41,42 and 63...Car stalls..help
|
|
| |
|
Sidom
Veteran
/ Moderator
Aug 18, 2009, 1:56 PM
Post #2 of 3
(1967 views)
|
Gotta a lot of stuff goin on here. I'm not sure what type of equipment you have or your skill level but you're gonna need a good voltmeter & scanner that reads the data stream & has bi-directional controls minium for this one.
(This post was edited by Sidom on Aug 18, 2009, 1:56 PM)
|
|
| |
|
Loren Champlain Sr
Veteran
/ Moderator
Aug 20, 2009, 11:00 AM
Post #3 of 3
(1953 views)
|
cracka; 26=Quad driver module error 39=TCC (torque convertor circuit) 41=Cam Sensor circuit 42=EST Circuit 63=EGR Circuit All of these could be related. This is going to sound like a crazy question, but do the brake lights work? If so, pin voltage testing is going to be required to find the problem. Could be a broken wire, poor ground, bent or damaged ECM pins, ect. If the brake lights don't work, address that first. Loren SW Washington
|
|
| |
|