Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Latest Forum Post
with_replies.gif image   1989 toyota pickup 3.0 crank no start
I have a 1989 toyota pickup 3.0 crank no...

with_replies.gif image   Strut spring orientation and strut mount tension nut
2017 Nissan rogue awd 2.5 L Put in Monro...

with_replies.gif image   Transmission stuck in part, I have tried everything
So I'm working on my elderly fathers 201...

with_replies.gif image   2017 dodge journey LED headlights on/off randomly
Year of vehicle 2017 Make of vehicle dod...

with_replies.gif image   Kia Soul starter replacement issues!
Okay so my car is a 2010 Kia soul 2.0 en...

hot_with_replies.gif image   Please Help - Knock sound & engine fail
Hi all, Hoping to get some insight and ...

with_replies.gif image   multiple warning lights
2013 GMC Terrain 130,000 miles 4 cylinde...

with_replies.gif image   03 alero no low speed blower
Good day everyone, I have a 2003 Olds a...

with_replies.gif image   04 Chevy 2500hd tail light issues
Help!!! I have changed my combo switch...

with_replies.gif image   1999 Grand Caravan Sport not starting.
Hi. I'm new here. I hope someone can hel...




1993 Mercury Villager 3.0 shuts down

Search for (search options)
 



amerbgd
New User

May 23, 2009, 1:56 AM

Post #1 of 7 (3589 views)
1993 Mercury Villager 3.0 shuts down Sign In
First of all the car hasn't been driven for a month and a half. Before that it has been driven for a month. Before that it has been driven about a mile every 2-3 weeks. I havent had these problems even when i haven't driven the car for several months.

Whenever i break a bit harder at stoplights it turns off. I checked the battery cables they are held on the battery tightly.


autojoe
User

May 23, 2009, 5:30 AM

Post #2 of 7 (3584 views)
Re: 1993 Mercury Villager 3.0 shuts down Sign In
check the brake booster vacuum line for a leak or bad connection.Any rough idle?


amerbgd
New User

May 23, 2009, 5:34 AM

Post #3 of 7 (3582 views)
Re: 1993 Mercury Villager 3.0 shuts down Sign In
very rough idle the whole car shakes but i also have a broken bolt that holds the exhaust manifold to the block. how do i find the brake booster line?


autojoe
User

May 23, 2009, 5:37 AM

Post #4 of 7 (3581 views)
Re: 1993 Mercury Villager 3.0 shuts down Sign In
its behind the master cylinder at firewall.the master cylinder is attached to it.


amerbgd
New User

May 23, 2009, 5:53 AM

Post #5 of 7 (3579 views)
Re: 1993 Mercury Villager 3.0 shuts down Sign In
just threw a look the front side of the cylindar and lines are dry and clean looked at the pavment under the car all dry. I drove it for 15min about 5 hours ago. If the cylindar is the problem is it possible to lose my brakes totally while driving?


(This post was edited by amerbgd on May 23, 2009, 6:00 AM)


autojoe
User

May 23, 2009, 6:05 AM

Post #6 of 7 (3575 views)
Re: 1993 Mercury Villager 3.0 shuts down Sign In
it does not hold fluid.......it passes air through line.check for any cracks and make sure all connections are tight and no play in them.take some dish soap in water and put some around connections and with running see if any bubbles.the exhaust leak causing back pressure could cause you problems.


autojoe
User

May 23, 2009, 6:08 AM

Post #7 of 7 (3573 views)
Re: 1993 Mercury Villager 3.0 shuts down Sign In
with engine off pump brake pedal 4-5 times and hold....the pedal should hold steady.....now still holding pedla firm start vehicle and pedal should drop to a point and then hold steady.





 
 
 






Search for (options) Privacy Sitemap