|
|
j0hnnyboy
User
Apr 4, 2011, 5:37 PM
Post #1 of 15
(10417 views)
|
|
98 s10 - vacuum lines?
|
Sign In
|
|
Hello all,
I have a lifted 98 s-10 4x4, high output Vortec 4.3L w/SFI (engine recently replaced with a crate motor; approx 15k on motor/shocks, 180k on chassis, and 80k on transmission)
I noticed there was a vacuum line just dangling, i traced it to the transfer case.
Here is the hose I saw:
And heres where I traced it to:
What is this hose for? Where does the other end connect to? Is there any reason, other than a terrible mechanic shop (loong story), that it would be left disconnected?
Note that there is a very small possibility that it may not be that particular hose(I was not able to trace one of them so i could be certain, it split off at a t and I couldn't follow it after that), although I'm pretty certain the arrow points out the correct one.
|
|
| |
|
|
re-tired
Veteran
/ Moderator
Apr 4, 2011, 9:20 PM
Post #2 of 15
(10400 views)
|
|
Re: 98 s10 - vacuum lines?
|
Sign In
|
|
First let me say thanks for the extra trouble of taking and posting pics . Some posters will not even give yr ,make and model. Unfortunetly the object kinda blends in with the background. It apppears that your holding a 3/8" hose with a bolt stuck in it . If thats the case its prob just a vent hose. If Im wrong , take another pic from a diff angle or maybe a towel for a background.
LIFE'S SHORT GO FISH
|
|
| |
|
|
j0hnnyboy
User
Apr 4, 2011, 9:54 PM
Post #3 of 15
(10390 views)
|
|
Re: 98 s10 - vacuum lines?
|
Sign In
|
|
Lol gladly; its hard enough to try to diagnose issues without being next to the vehicle, let alone over the net. Thanks for the reply :D
That's exactly what it is, hose with a plug.
The last auto shop I had it in wasn't much of an auto shop apparently, because I've found a whole mess of things wrong/things that were left unfixed.
Any idea as to where that line might go or why it was plugged? I looked around for open ports for it but found none. Only info I was able to find about that 3 port vacuum hose connection on the transfer case was a picture that showed it in the chilton book. Didn't describe it at all though
|
|
| |
|
|
re-tired
Veteran
/ Moderator
Apr 4, 2011, 10:14 PM
Post #4 of 15
(10389 views)
|
|
Re: 98 s10 - vacuum lines?
|
Sign In
|
|
OK ,a line like that would most likely be a vent hose for either the transfer case or the front diff . Look on each for a hose that size and folllow it up . If thats it , zip tie it out of harms way with end pointing down and bolt removed.
LIFE'S SHORT GO FISH
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Apr 5, 2011, 5:22 AM
Post #5 of 15
(10382 views)
|
|
Re: 98 s10 - vacuum lines?
|
Sign In
|
|
I'm guessing vacuum controls for the 4X4..
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Timthecarguy719
User
Apr 5, 2011, 3:07 PM
Post #6 of 15
(10370 views)
|
|
Re: 98 s10 - vacuum lines?
|
Sign In
|
|
I know the old S-10's have vacuum controled 4wd, but i thought the newer ones were electronic?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Apr 5, 2011, 3:15 PM
Post #7 of 15
(10367 views)
|
|
Re: 98 s10 - vacuum lines?
|
Sign In
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
techforfree
User
Apr 7, 2011, 5:13 AM
Post #8 of 15
(10352 views)
|
|
Re: 98 s10 - vacuum lines?
|
Sign In
|
|
Not to worry thats the vent for your transfor case..and don't get hooked to anything..but normally theres a clip somewhere to keep it in place..just tie it our of the way and out of sight and you're good to go...good luck
|
|
| |
|
|
j0hnnyboy
User
Apr 7, 2011, 3:40 PM
Post #9 of 15
(10346 views)
|
|
Re: 98 s10 - vacuum lines?
|
Sign In
|
|
Noted. Great diagram too, where do you find that stuff? lol
Thanks everyone 
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Apr 7, 2011, 3:47 PM
Post #10 of 15
(10343 views)
|
|
Re: 98 s10 - vacuum lines?
|
Sign In
|
|
We pay for it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Timthecarguy719
User
Apr 7, 2011, 5:42 PM
Post #11 of 15
(10339 views)
|
|
Re: 98 s10 - vacuum lines?
|
Sign In
|
|
Where do you buy it at?
I need some of that kinda info!!
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Apr 7, 2011, 6:04 PM
Post #12 of 15
(10334 views)
|
|
Re: 98 s10 - vacuum lines?
|
Sign In
|
|
Alldata For $170 per month, you can have it too.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on Apr 7, 2011, 6:06 PM)
|
|
| |
|
|
Timthecarguy719
User
Apr 7, 2011, 6:08 PM
Post #13 of 15
(10326 views)
|
|
Re: 98 s10 - vacuum lines?
|
Sign In
|
|
$170 a month???
That's crazy.
I'll just ask you for it! LOL 
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Apr 7, 2011, 6:15 PM
Post #14 of 15
(10322 views)
|
|
Re: 98 s10 - vacuum lines?
|
Sign In
|
|
And maybe you'll get it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Timthecarguy719
User
Apr 7, 2011, 6:19 PM
Post #15 of 15
(10318 views)
|
|
Re: 98 s10 - vacuum lines?
|
Sign In
|
|
Really though i would appreciate any information from that place cause i here it's a very good program.
When i was doing the topend rebuild on my sisters geo metro I really could have used a vacuum diagram.
And then i was doing the fan thing and could have used a good electrical diagram cause the haynes one is crap.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
