Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Chevy Blazer


Search for (search options)
 



Guest
Anonymous Poster
wyble4@embarqmail.com

Jun 20, 2009, 3:25 AM

Post #1 of 4 (2331 views)
Chevy Blazer Sign In

I have a 1994 Chevy blazer. The driver front caliper seems to be sticking in that it takes a while for the pressure to release. After driving a little bit it frees up. The driver side when sprayed with water sizzles like a frying pan, the passenger side does not sizzle. I have bled the entire brake system and replaced the front brake pads and driver side rotor. Any thoughts?


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jun 20, 2009, 3:29 AM

Post #2 of 4 (2328 views)
Re: Chevy Blazer Sign In

As yet, you haven't done anything to help this problem. You need to replace both calipers and both front brake flex hoses. Either one can cause this problem. The hoses rupture internally and don't allow the fluid to return.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



Guest
Anonymous Poster

Jun 20, 2009, 5:49 AM

Post #3 of 4 (2318 views)
Re: Chevy Blazer Sign In

I replaced the drivers front flex brake line and bled the system. It works great. Thanks for the help.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jun 20, 2009, 5:52 AM

Post #4 of 4 (2314 views)
Re: Chevy Blazer Sign In

You can likely expect more problems in the future if you don't replace both at the same time. It's the only way to get uniform braking.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.







 
 
 






Search for (options) Privacy Sitemap