|
|
|
Clutch noise 02 mustang gt
|
|
|
| |
|
|
mkw037
Novice
Sep 3, 2011, 1:46 PM
Post #1 of 8
(3976 views)
|
|
Clutch noise 02 mustang gt
|
Sign In
|
|
2002 Mustang GT
97,000 miles just notices yesterday when I press my clutch in (but not when I release) it makes this noise.
The stretching-type noise is just my leg on the seat that's nothing, just the clutch noise is the problem
http://www.youtube.com/watch?v=OZO4LFJxPEk
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Sep 3, 2011, 2:05 PM
Post #2 of 8
(3953 views)
|
|
Re: Clutch noise 02 mustang gt
|
Sign In
|
|
Could be a dry clutch fork pivot pin or even the clutch release bearing making noise as it slides on the transmission front bearing support.
You should get the vehicle in the air and have someone lay underneath while you move the clutch pedal to see if they can pinpoint where the noise is coming from. The noise is pretty loud, so you shouldn't have a problem locating it.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 3, 2011, 2:11 PM
Post #3 of 8
(3951 views)
|
|
Re: Clutch noise 02 mustang gt
|
Sign In
|
|
That's probably a bad throw out bearing. It's time for a clutch job.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
mkw037
Novice
Sep 3, 2011, 2:29 PM
Post #4 of 8
(3947 views)
|
|
Re: Clutch noise 02 mustang gt
|
Sign In
|
|
To replace the throw out bearing requires to drop the tranny right?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 3, 2011, 2:31 PM
Post #5 of 8
(3944 views)
|
|
Re: Clutch noise 02 mustang gt
|
Sign In
|
|
Most definitely. Would be foolish not to change the clutch too while it's out.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Sep 3, 2011, 2:47 PM
Post #6 of 8
(3938 views)
|
|
Re: Clutch noise 02 mustang gt
|
Sign In
|
|
If you do end up pulling the transmission, buy a clutch kit and have the flywheel resurfaced. It is also a good idea to replace the rear main seal while your in there.
The clutch kit comes with the clutch disc, pressure plate, pilot bearing, clutch release bearing, and clutch alignment tool. You should also replace the clutch fork pivot pin because they do wear out. You can get the pivot pin from the dealer.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
mkw037
Novice
Sep 3, 2011, 3:30 PM
Post #7 of 8
(3933 views)
|
|
Re: Clutch noise 02 mustang gt
|
Sign In
|
|
If the tranny is getting dropped I will be getting a new clutch for sure. I will be more than likely be having this done in a shop so having the flywheel resurfaced requires what? Will that increase the cost a lot? Same with the rear main seal, That a lot more?
Another quick question, I've never had something like this done in a shop. Do you buy your own clutch kit/parts and basically just pay them for labor or do they buy the parts themselves so they can mark them up a bit?
|
|
| |
|
| | |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
