|
|
restez
New User
Aug 16, 2011, 8:15 PM
Post #1 of 8
(5743 views)
|
|
Parking brake stays on
|
Sign In
|
|
why does all of a sudden my pb stay on its a 1992 toyota camry pb is a hand brake its definitly not on and released but lite stays on can anyone
help me with this i appreciat it
Tony
ok up date i tried this
i unplugged the wire going to the brake fluid resivior the parking brake went off when released
so does this mean its not my parking brake?
(This post was edited by restez on Aug 20, 2011, 2:51 PM)
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Aug 16, 2011, 8:43 PM
Post #2 of 8
(5723 views)
|
|
Re: Parking brake stays on
|
Sign In
|
|
You should check the fluid level in your master cyl. If it gets too low it will make that light come on.
If it low, you need to get your brks checked. The frt pads getting low or leak can cause the level to drop enough to turn on the light............
|
|
| |
|
|
dmac0923
Enthusiast
Aug 16, 2011, 11:03 PM
Post #3 of 8
(5707 views)
|
|
Re: Parking brake stays on
|
Sign In
|
|
+1, for sidoms response.
__________________________________________________
2015 Jeep Grand Cherokee
2002 Ford Ranger
2004 Toyota Corolla
1969 Ford Mustang Mach 1
|
|
| |
|
|
restez
New User
Aug 17, 2011, 8:46 PM
Post #4 of 8
(5683 views)
|
|
Re: Parking brake stays on
|
Sign In
|
|
thanks it was really low so i filled to line and light still stays on
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Aug 17, 2011, 11:10 PM
Post #5 of 8
(5679 views)
|
|
Re: Parking brake stays on
|
Sign In
|
|
Lightly tap on the reservoir, some times the when the level gets low the sensor will stick on the bottom...
Since the level was very low the brk system needs to be inspected for pad wear & hydraulic leaks to determine the reason for the low level........
Hopefully you used brake fluid and no other substitute or the system would need to be flushed asap....
|
|
| |
|
|
restez
New User
Aug 20, 2011, 2:33 PM
Post #6 of 8
(5656 views)
|
|
Re: Parking brake stays on
|
Sign In
|
|
Thanks i will try that
|
|
| |
|
|
restez
New User
Aug 20, 2011, 2:50 PM
Post #7 of 8
(5655 views)
|
|
Re: Parking brake stays on
|
Sign In
|
|
hi sidom
you answered my post on pb i tried what you said still same but when i unplugged the wire going to the brake fluid resivior the parking brake went off when released
so does this mean its not my parking brake?
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Aug 22, 2011, 2:25 AM
Post #8 of 8
(5648 views)
|
|
Re: Parking brake stays on
|
Sign In
|
|
Yes, if the light went out when you disconnected the reservoir wire, that would be a indication the problem is with the sensor. Either it's "stuck" at the bottom or faulty....
If gently rapping the res didn't get the light to go out. You may need to replace the sensor........ In most cases like this that I've seen the sensor just gets stuck at the bottom...
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
