|
| | |
|
dennishazard
User
Oct 6, 2011, 3:22 PM
Post #1 of 3
(1976 views)
|
i have a 93 pontiac grand am se 3.3 liter, my heater core took a dump so i replaced it, my problem is im not sure if i hooked it up right ( i forgot which hose went where) is there any pictures out there some one can send me or give me a link to ? if ur in the car we hooked up the hose on the right to the upper pipe which i believe is pipe one and the left side of the heater core to the lower pipe which i believe is pipe 3, am i right? we started the car and let it get warm and the heater core got hot, im having trouble with the car being real sluggish, so i dont know if its from the hoses being wrong or if its just being sluggish, before we did the core my car was running sluggish when i hit the gas it didnt really want to go unless i feathered the gas, sometimes if i let it warm up for a minute it would run better, but still sluggish, but im more worried about the heater core right now,if ur in the car what hose goes to what pipe ? i really need help on this before i put the dash back together, there is a upper pipe and a lower pipe coming off the block, i dont remember how they were when i took the off and could really use some help, or even pics,,,,,,,,,,,,,,,,,,,thank you very much.........Dennis, from milwaukee, wi
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Oct 6, 2011, 3:56 PM
Post #2 of 3
(1960 views)
|
It will work either way. One side effect of having them wrong sometimes is you may hear gurgling water in the dash. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
dennishazard
User
Oct 6, 2011, 5:48 PM
Post #3 of 3
(1945 views)
|
ok thank you
|
|
| |
|