Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









oil reading


Search for (search options)
 



Guest
Anonymous Poster
brich38@aol.com

Feb 26, 2009, 1:50 PM

Post #1 of 3 (1102 views)
post icon oil reading Sign In

I have a 02 dodge dakota 3.9 that i just bought with 155000 on her one owner nice and clean the only problem is the oil gauge was reading low and high as I drove it, so i changed the oil and used lucas oil and put a new sending unit in it, Now when iI start it the oil presure is high till it gets warm then it drops to nomal. as i drive it rises and drops as I as the rpms come down any ideas iam I looking at internal


Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

Feb 26, 2009, 4:17 PM

Post #2 of 3 (1100 views)
Re: oil reading Sign In

I tried coming up with oil pressure specs for you to no avail....What you are describing sounds okay and perfectly normal, other than the oil pressure needle 'bouncing'. Probably, just the guage. But, to be sure, you can connect a manual guage where the oil pressure sending unit is and take pressure readings hot & cold, @ idle, and @ high rpms just to be sure.
Loren
SW Washington


RKRICH
Anonymous Poster
brich38@aol.com

Feb 26, 2009, 5:39 PM

Post #3 of 3 (1097 views)
Re: oil reading Sign In

THANKS FOR THE INFO






 
 
 






Search for (options) Privacy Sitemap