Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Latest Forum Post
with_replies.gif image   1989 toyota pickup 3.0 crank no start
I have a 1989 toyota pickup 3.0 crank no...

with_replies.gif image   Strut spring orientation and strut mount tension nut
2017 Nissan rogue awd 2.5 L Put in Monro...

with_replies.gif image   Transmission stuck in part, I have tried everything
So I'm working on my elderly fathers 201...

with_replies.gif image   2017 dodge journey LED headlights on/off randomly
Year of vehicle 2017 Make of vehicle dod...

with_replies.gif image   Kia Soul starter replacement issues!
Okay so my car is a 2010 Kia soul 2.0 en...

hot_with_replies.gif image   Please Help - Knock sound & engine fail
Hi all, Hoping to get some insight and ...

with_replies.gif image   multiple warning lights
2013 GMC Terrain 130,000 miles 4 cylinde...

with_replies.gif image   03 alero no low speed blower
Good day everyone, I have a 2003 Olds a...

with_replies.gif image   04 Chevy 2500hd tail light issues
Help!!! I have changed my combo switch...

with_replies.gif image   1999 Grand Caravan Sport not starting.
Hi. I'm new here. I hope someone can hel...




scratching noise after replacement of timin belt

Search for (search options)
 



Guest
Anonymous Poster

Mar 7, 2009, 5:00 PM

Post #1 of 4 (3052 views)
post icon scratching noise after replacement of timin belt Sign In
The auto mechanic just recently replaced the timing belt, water pump, AC and alternator belts of my car. When I start my car in the morning, or after it sits and get cold, there is this somewhat loud scratching noise..the noise like a clack-clack-clack-clack? or a click-click-click-click..The noise started a after the replacement of parts and it greets me every morning. After the car warms up, the noise disappears. The mechanic said they don't hear anything or it just normal. Pls help me....


Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

Mar 7, 2009, 6:13 PM

Post #2 of 4 (3048 views)
Re: scratching noise after replacement of timin belt Sign In
Please; Year, make, model, engine size. Have you left the car, overnight, with the mechanic so he can hear it when cold? How does it seem to run? Was the timing belt broken when you had it replaced, or just did it for maintenance?
Loren
SW Washington


Guest
Anonymous Poster

Mar 7, 2009, 8:56 PM

Post #3 of 4 (3043 views)
Re: scratching noise after replacement of timin belt Sign In
In Reply To
Please; Year, make, model, engine size. Have you left the car, overnight, with the mechanic so he can hear it when cold? How does it seem to run? Was the timing belt broken when you had it replaced, or just did it for maintenance?

Mitsubishi Lancer 2002 - Automatic 2.0L. The car stayed overnight at the auto shop, the mechanic checked it in the morning and informed me that he don’t hear any scratching noise. The engine is running good...replacement of timing belt for 60K maintenance. Thank for the quick reply...


DanD
Veteran / Moderator
DanD profile image

Mar 8, 2009, 3:02 AM

Post #4 of 4 (3035 views)
Re: scratching noise after replacement of timin belt Sign In
Even though the accessory drive belt(s) are new, one may have a hard spot in its compound or a bit of glazing that will/can make a noise when it’s cold.
The glazing could have been caused by some coolant being spilled on the belt or a bit of grease/grit getting on it during installation?
What you could try doing the next time you think the car will make this noise, is.
Have one of those household pump spray bottles filled with water ready; start the engine; if it’s making the noise; spray a stream of water into the belts.
If the noise goes away or changes (quieter or louder) for a few seconds; then you’ve just proven that the noise is likely coming from the belts.
I don’t mean that you need to soak the whole engine compartment with water; a couple of squirts directly onto/into the belts or pulleys is all that is usually needed.
Now this isn’t a fix, the noise (if this is what it is) will come back. You may need to replace the belt again; along with cleaning the pulleys?
Without hearing this noise or seeing the vehicle; we’re assuming that the technician has aligned the pulleys properly and the belts are adjusted to the proper tension?

Dan.

Canadian "EH"









 
 
 






Search for (options) Privacy Sitemap