Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Latest Forum Post
no_replies.gif image   Carbon Fiber parts/concern
Im a bit of a hypochondriac so when I sa...

hot_with_replies.gif image   This isn't normal, right?
Gap between connections on exhaust. I be...

with_replies.gif image   Lukewarm Heat............
New antifreeze reverse flush heater core...

with_replies.gif image   multiple warning lights
2013 GMC Terrain 130,000 miles 4 cylinde...

with_replies.gif image   2014 Nissan Sentra Shaking
Car recently started shaking when accele...

no_replies.gif image   Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
N/A

hot_with_replies.gif image   1989 toyota pickup 3.0 crank no start
I have a 1989 toyota pickup 3.0 crank no...

with_replies.gif image   Strut spring orientation and strut mount tension nut
2017 Nissan rogue awd 2.5 L Put in Monro...

with_replies.gif image   Transmission stuck in part, I have tried everything
So I'm working on my elderly fathers 201...

with_replies.gif image   2017 dodge journey LED headlights on/off randomly
Year of vehicle 2017 Make of vehicle dod...




starter diying?

Search for (search options)
 



Guest
Anonymous Poster

Oct 8, 2008, 10:51 PM

Post #1 of 4 (1244 views)
starter diying? Sign In
ok when i start my car in the moring i hear a click noise the engine wont start i buy new batts and still does it some times its a stick shif i do push the cluth all the way down when i try to start it it wont then i try again and starts after the engine has been run it dont do it any more only happens to me in the moring..

what cause that? do i need a new starter soon?

thanks


dmac0923
Enthusiast

Oct 9, 2008, 5:37 AM

Post #2 of 4 (1240 views)
Re: starter diying? Sign In
i would look at your neutral safety switch on your clutch. also check the battery terminals are tight and clean on both the battery and other connections. New battery or not damaged or corroded batter terminals must be replaced
__________________________________________________
2015 Jeep Grand Cherokee
2002 Ford Ranger
2004 Toyota Corolla
1969 Ford Mustang Mach 1


HYdrogen_on_Demand
User

Oct 9, 2008, 1:25 PM

Post #3 of 4 (1232 views)
Re: starter diying? Sign In
After a car has been running it is warmed up, the metal parts swell from the heat, and all condensations are evaporated off. Basically what you have is a poor connection somewhere in the system. Take them apart and clean them up with a wire brush and reassemble them tightly. Don't over tighten or you'll break something.

Good luck !!


Guest
Anonymous Poster

Oct 9, 2008, 7:01 PM

Post #4 of 4 (1228 views)
Re: starter diying? Sign In
In Reply To
After a car has been running it is warmed up, the metal parts swell from the heat, and all condensations are evaporated off. Basically what you have is a poor connection somewhere in the system. Take them apart and clean them up with a wire brush and reassemble them tightly. Don't over tighten or you'll break something.

Good luck !!
thanks everyoneSmile

ill give that a look





 
 
 






Search for (options) Privacy Sitemap