|
|
hyundai lantra 1994 1.5 MPI engine
|
|
|
| |
|
gaz9012
New User
May 25, 2009, 7:15 AM
Post #1 of 3
(1819 views)
|
hyundai lantra 1994 1.5 MPI engine
|
Sign In
|
|
Hi people, thanks for having a look the other nigight i was drving home, when i noticed i was losing pressure on my clutch, by the time i'd got home, i had only about an inch of movment left in the pedal. Called my break down guy just for him to turn up and tell me i need a new slave cylinder. i need a step by step guild to replacing it, i know how to bleed the fluid, just need to know how to replace it. thanks again Gaz
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 26, 2009, 6:19 AM
Post #2 of 3
(1810 views)
|
Re: hyundai lantra 1994 1.5 MPI engine
|
Sign In
|
|
There is no 1.5 engine for that vehicle. The choices are 1.6 and 1.8 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Loren Champlain Sr
Veteran
/ Moderator
May 26, 2009, 5:46 PM
Post #3 of 3
(1802 views)
|
Re: hyundai lantra 1994 1.5 MPI engine
|
Sign In
|
|
Gaz; As you can see, there is only two bolts holding it to the bell-housing. You'll need to re-use the push-rod that goes in the end, of course. Loren SW Washington
|
|
| |
|