Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









transmission


Search for (search options)
 



hobbs
Novice

Apr 5, 2010, 12:46 PM

Post #1 of 4 (1773 views)
transmission Sign In

hello i have a 1993 mazda 626 2.0 when i put the car in drive its pulling out in second gear and will not change up or down the mph gauge quit and so did the cruse control the hold light was flashing off and on before and gears changed fine but the mph gauge still did not work and if i change the gears from low to second then to drive it stays in second any help or ideas would be great.


Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

Apr 7, 2010, 7:31 PM

Post #2 of 4 (1760 views)
Re: transmission Sign In

Hobbs; Gonna take some diagnosing, but it sounds like a VSS (vehicle speed sensor) problem. The VSS can cause both the symptoms that you describe.
Loren
SW Washington


hobbs
Novice

Apr 12, 2010, 12:50 PM

Post #3 of 4 (1753 views)
Re: transmission Sign In

I recently just had it ran on computer at garage and gave us no signs of vss sensor only that a sensor was bad any other ideas other than just getting a used speed sensor at junkyard. Its kinda like a guessing game?



Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Apr 12, 2010, 1:12 PM

Post #4 of 4 (1751 views)
Re: transmission Sign In

Pricey sucker! Just checked. Perhaps try taking yours out since there are no codes and see if just the nylon gear is the trouble??

Just a maybe and probably cheap even at a dealer,

T

Whole unit should look like this.........









 
 
 






Search for (options) Privacy Sitemap