Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Latest Forum Post
with_replies.gif image   This isn't normal, right?
Gap between connections on exhaust. I be...

with_replies.gif image   Lukewarm Heat............
New antifreeze reverse flush heater core...

with_replies.gif image   multiple warning lights
2013 GMC Terrain 130,000 miles 4 cylinde...

with_replies.gif image   2014 Nissan Sentra Shaking
Car recently started shaking when accele...

no_replies.gif image   Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
N/A

hot_with_replies.gif image   1989 toyota pickup 3.0 crank no start
I have a 1989 toyota pickup 3.0 crank no...

with_replies.gif image   Strut spring orientation and strut mount tension nut
2017 Nissan rogue awd 2.5 L Put in Monro...

with_replies.gif image   Transmission stuck in part, I have tried everything
So I'm working on my elderly fathers 201...

with_replies.gif image   2017 dodge journey LED headlights on/off randomly
Year of vehicle 2017 Make of vehicle dod...

with_replies.gif image   Kia Soul starter replacement issues!
Okay so my car is a 2010 Kia soul 2.0 en...




2003 Suburban

Search for (search options)
 



Guest
Anonymous Poster

Jul 28, 2008, 8:19 AM

Post #1 of 4 (3257 views)
2003 Suburban Sign In
Rear washer not spraying. How do I trouble shoot and repair quickly????


DanD
Veteran / Moderator
DanD profile image

Jul 28, 2008, 2:15 PM

Post #2 of 4 (3245 views)
Re: 2003 Suburban Sign In
Can you hear the washer pump running when you push the washer button?
If not; check the 15 amp fuse that is in the left side instrument cluster fuse panel.
If fuse is ok; unplug the rear washer pump wiring connector at the pump and test if there is power & ground getting to the washer pump when the button is pushed.
If there is power & ground; then the pump will need replacing; after you’ve checked that the harness was making a good connection.
This should be enough to get you started. Let us know what you find with these tests and we’ll go further if need be.

Dan.

Canadian "EH"






Mark H
Anonymous Poster
markhowlett@comcast.net

Jul 28, 2008, 6:03 PM

Post #3 of 4 (3241 views)
Re: 2003 Suburban Sign In
 I don't here the pump run at all. The front washer works fine. The fuse you are refering to, is it found under the hood in the main fuse box? Also, excatly where is the pump for the rear window? Thanks


DanD
Veteran / Moderator
DanD profile image

Jul 29, 2008, 4:07 AM

Post #4 of 4 (3237 views)
Re: 2003 Suburban Sign In
I’m not a 100% sure on the pump’s location but if you only had to fill the one washer container for both front & rear washer systems then the pump will be in the bottom of that container or in the bottom of the one you have to fill for the rear.
When you find the pump(s) the one that has the dark green/white wire and black wire in its connector, will be the pump for the rear system.

The fuse panel I’m talking about is under the left (drivers) side of the dash. The fuse you’re looking for will be a 15 amp marked WPR. it may also have RR marked in front of the WPR.

If by chance the rear wiper pulses when you push the washer button; tells us that the fuse almost has to be ok.

When you push the washer button, you are connecting power from the fuse to the washer pump and to the rear wiper control module. The control module senses this power input and turns on the rear wiper automatically too wipe the window while it’s being sprayed and then turn off, after the window has been wiped dry.


Dan.

Canadian "EH"









 
 
 






Search for (options) Privacy Sitemap