|
|
samg.
User
Mar 12, 2012, 4:17 PM
Post #1 of 12
(3132 views)
|
|
94 acura vigor starter
|
Sign In
|
|
I have one in my stall right now. I feel terrible asking because I work on cars for a living, but this is driving me nuts.
I got the starter out no problems, but I can not for the life of me get it pushed back in the area to save my life. I probably spent an hour at the end of the day trying just to get it it.
It's located under the intake so it's kind of a turd to get a look at anything....anyone here done one?
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Mar 12, 2012, 4:22 PM
Post #2 of 12
(3125 views)
|
|
Re: 94 acura vigor starter
|
Sign In
|
|
Are you installing the starter you took out or a replacement? You take the intake manifold brace out?
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Mar 12, 2012, 4:25 PM)
|
|
| |
|
|
samg.
User
Mar 12, 2012, 4:26 PM
Post #3 of 12
(3117 views)
|
|
Re: 94 acura vigor starter
|
Sign In
|
|
It is a replacement, I have compared them and measured them length wise 2 times. The one I took out was a Mitsubishi and the one I'm installing is also a mits. They are identical (minus the dirst and oil).
I really can't understand for the life of me why this is giving me so much gruff.
And also, yes the brace is off. I took a few other hoses off to get to thw top bolt easier also.
(This post was edited by samg. on Mar 12, 2012, 4:27 PM)
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Mar 12, 2012, 4:29 PM
Post #4 of 12
(3109 views)
|
|
Re: 94 acura vigor starter
|
Sign In
|
|
Are you having problems trying to get it to sit flush in the hole or are you having problems trying to get it into the hole?
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
samg.
User
Mar 12, 2012, 4:35 PM
Post #5 of 12
(3096 views)
|
|
Re: 94 acura vigor starter
|
Sign In
|
|
My bad for not specifying, I just can't get it the nose of it in the hole, so I can swing the backside of it towards the engine to get it fully mounted.
If that made any sense.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Mar 12, 2012, 4:38 PM
Post #6 of 12
(3089 views)
|
|
Re: 94 acura vigor starter
|
Sign In
|
|
I feel like a psychiatrist asking you all these questions.
You know how this is. It's one of those you spend hours screwing around with and you get frustrated. You come back the next day and it falls right in.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Mar 12, 2012, 4:41 PM)
|
|
| |
|
|
samg.
User
Mar 12, 2012, 4:44 PM
Post #7 of 12
(3078 views)
|
|
Re: 94 acura vigor starter
|
Sign In
|
|
I hope man. I like working on things other than gm sometimes, today not so much.
Thanks
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Mar 12, 2012, 4:46 PM
Post #8 of 12
(3073 views)
|
|
Re: 94 acura vigor starter
|
Sign In
|
|
I haven't done a Vigor starter, but do you remember which end came down first when you removed the older starter? Did the ass come down first or the nose?
You should try out a starter on a older Nissan Pathfinder. I agree that most, not all, GMs are mechanic friendly. I started out working on GM only, but currently working at a shop that does all makes. You get used to it.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Mar 12, 2012, 5:01 PM)
|
|
| |
|
|
speed
User
Mar 12, 2012, 6:13 PM
Post #9 of 12
(3048 views)
|
|
Re: 94 acura vigor starter
|
Sign In
|
|
the new envoys have a rediculous spot for an oil filter that i never fail to burn my hand on because of the stupid catalytic converter.....biggest PITA oil filter ever. hope you figure that starter out though it really doesnt sound fun
GM ASEP 26 SCC Milford ASE certified in Brakes and Electrical on Thursday April 5th 2012
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Mar 12, 2012, 6:31 PM
Post #10 of 12
(3044 views)
|
|
Re: 94 acura vigor starter
|
Sign In
|
|
How about the oil filter on a Toyota 1mz-fe 3.0L. Customer is waiting after driving to the moon and back and the oil filter sits right under the exhaust manifold and can only be unscrewed from the top. Welders gloves comes in handy.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Mar 12, 2012, 6:39 PM)
|
|
| |
|
|
samg.
User
Mar 12, 2012, 6:34 PM
Post #11 of 12
(3038 views)
|
|
Re: 94 acura vigor starter
|
Sign In
|
|
If you're talking about the acadias, they do suck. I just put an engine in one last month.
I'm sure I'll get the starter in, just one of those days.
|
|
| |
|
|
speed
User
Mar 12, 2012, 6:46 PM
Post #12 of 12
(3034 views)
|
|
Re: 94 acura vigor starter
|
Sign In
|
|
yes the acadias too, and yeah that filter looks like a PITA and sounds like it too
GM ASEP 26 SCC Milford ASE certified in Brakes and Electrical on Thursday April 5th 2012
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
