|
|
1dodge1mopar
User
May 11, 2012, 1:49 AM
Post #1 of 10
(1654 views)
|
I HAVE A '01 CHEV 1500 LT 4X4 WITH 16x6.5" 6-BOLT RIMS.
WHAT-IF ANY-DANGER IS THERE IN CHANGING TO A 16x8" 6-BOLT RIM WITH THE THE SAME TIRES?
THANX
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
May 11, 2012, 3:54 AM
Post #2 of 10
(1622 views)
|
That all depends on the size of the tires. If they aren't wide enough to be properly seated to the beads of the rim you will have a very dangerous truck.
|
|
| |
|
|
1dodge1mopar
User
May 11, 2012, 12:51 PM
Post #3 of 10
(1597 views)
|
I HAVE 245/75R16 FIRESTONE ALL-SEASONS.
THANX
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
May 11, 2012, 2:10 PM
Post #4 of 10
(1592 views)
|
I wouldn't do it.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 11, 2012, 2:52 PM
Post #5 of 10
(1589 views)
|
A 75 series tire on an 8 inch rim. That's not good. The rim is wider than the tire.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
1dodge1mopar
User
May 11, 2012, 6:45 PM
Post #6 of 10
(1569 views)
|
FROM WHAT I KNOW ABOUT TIRES...THE P245 OF A P245/75R16 IS THE WIDTH OF THE TIRE. IS THAT NOT CORRECT? IN THIS CASE...IT WOULD BE 9.65". AM I MISSING SOMETHING?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 11, 2012, 6:50 PM
Post #7 of 10
(1566 views)
|
That would be a measurement across the cross section, not at the bead. that would be considerably less. the 75 is the aspect ratio which means it;'s a relatively narrow tire considering the height and would have a footprint considerably narrower. It would not be a correct mount on an 8" rim.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
1dodge1mopar
User
May 11, 2012, 7:27 PM
Post #8 of 10
(1558 views)
|
MANY THANX FOR THE CLARIFICATION.
WHAT WOULD BE THE BEST REPLACEMENT TIRE SIZE FOR AN 8" RIM TO MEET THE SAME DIAMETER (95.7") OF MY TIRES-SO AS TO NOT CHANGE THE VEHICLE SPEED/SPEEDO?
THANX
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 12, 2012, 3:09 AM
Post #10 of 10
(1538 views)
|
That's not the way things should be done. You don't match a tire to a wheel, you match a wheel to the correct tire.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
This isn't normal, right?
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
