|
|
|
2003 taurus cooling system
|
|
|
| |
|
|
smoke42075
New User
Dec 2, 2010, 11:55 AM
Post #1 of 4
(2398 views)
|
|
2003 taurus cooling system
|
Sign In
|
|
2003 taurus with ohv 6cyl 3.0 170,000 miles
problem began with overheating resulting in shutdown of engine, no restart untill engine cooled
I have replaced themostat, flushed system, and replaced cts, sending unit appears to be working
engine no longer shuts down (cts fixed i think)i have replaced both fan relays, fan fuse is good
Heater doesnt blow as hot as it orig did, have not been able to get cooling fans to come on after running at idle for 1hr and as well running engine at 3000 rpm to bring temp up and still no cooling fan, slight smell when defrost is run
PLS help the only thing left are heat core, water pump, pcm, and fan motors
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Dec 2, 2010, 12:01 PM
Post #2 of 4
(2392 views)
|
|
Re: 2003 taurus cooling system
|
Sign In
|
|
So, what is the problem now? The engine isn't getting hot enough to need the fan? Why is that a problem?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
smoke42075
New User
Dec 2, 2010, 1:35 PM
Post #3 of 4
(2387 views)
|
|
Re: 2003 taurus cooling system
|
Sign In
|
|
The heat barely even gets warm and every car i have had the fan will come on after some time at idle
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Dec 2, 2010, 1:47 PM
Post #4 of 4
(2385 views)
|
|
Re: 2003 taurus cooling system
|
Sign In
|
|
See if the fan comes on with the A/C. I wouldn't worry about it if it's not overheating.
For your heat, With the engine at full operating temp, locate the 2 heater hoses where they go into the firewall and feel them to see if they are both too hot to hold. If they both are..........
The heat in that vehicle is controlled by a blend door that regulates heated air flow. it is operated by an electric motor/actuator. The problem can be that the actuator is stripped or inoperative or the door itself could be damaged. This is what needs to be determined by examining the actuator and see if it is responding to heat change commands or not.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
