Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









87 nissan timing


Search for (search options)
 



jlrodgers74
User

Jan 11, 2010, 11:06 PM

Post #1 of 3 (3113 views)
87 nissan timing Sign In

I was given an 87 nissan maxima with 3.0 engine (doesnt run). The original owner was convinced someone put something in the gas tank. I removed the back seat and changed the fuel pump and drained out all of the fuel. I also changed fuel filter and put some injector cleaner in it. I was able to get the car to run only if i kept it reved up and then it would stall. Today I tweaked the alternator a bit and was able to get it to idle. The car has 115k on it and I am assuming it has the original timing belt. could someone please send me a diagram of how to properly replace the timing belt. Also, is there other things i should replace while i have it apart and what is the process of setting the timing properly after i replace the belt or chain. Thank You Very Much


Sidom
Veteran / Moderator
Sidom profile image

Jan 11, 2010, 11:21 PM

Post #2 of 3 (3110 views)
Re: 87 nissan timing Sign In

Probably wouldn't be a bad idea to replace the water pump, idlers & tensioner. Inspect the cam & crank seals, any doubt and this would be the time to change those as well...

These are the timing the marks. The R cam marks are the same as the Left. Most replacement belts will have white lines to help make sure the marks are lined up....




jlrodgers74
User

Jan 12, 2010, 10:35 AM

Post #3 of 3 (3106 views)
Re: 87 nissan timing Sign In

Thanks for the diagram and the advice. Is there any torque settings on any of the bolts that I should know about before I go tightening things back down? I think I will at least change the water pump and tensioner.






 
 
 






Search for (options) Privacy Sitemap