Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









95 Cadillac Seville Alternator install


Search for (search options)
 



Guest
Anonymous Poster
riccisuggs@hotmail .com

Sep 14, 2009, 10:04 AM

Post #1 of 3 (3496 views)
95 Cadillac Seville Alternator install Sign In

What is the best way to get this alternator out?


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Sep 15, 2009, 5:59 PM

Post #2 of 3 (3483 views)
Re: 95 Cadillac Seville Alternator install Sign In

Don't know this one specifically but look. It may require tilting the engine or removing and exhaust part - dunno for sure without looking,

T



Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Sep 15, 2009, 6:05 PM

Post #3 of 3 (3477 views)
Re: 95 Cadillac Seville Alternator install Sign In

Assuming you have a 4.6 engine, here are the instructions.



REMOVE OR DISCONNECT
  1. Negative battery cable.
  2. Cover from headlamps and radiator shroud.
  3. Air cleaner.
  4. Left engine torque strut.
  5. Upper transmission oil cooler line.
  6. Right and left cooling fans.
  7. Serpentine belt from alternator pulley.
  8. Alternator lower front and front top bolts.
  9. Harness connector and output cable from alternator.
  10. Two bolts from alternator rear bracket to alternator. The bolt nearest the exhaust manifold cannot be removed from the bracket but can be backed out to allow for removal of the alternator.
  11. A/C splash shield from cradle (3 bolts).
  12. Access panel from bottom side of radiator support (4 bolts).
  13. Engine harness clip from cradle.
  14. Alternator from vehicle. The alternator can be moved out away from the engine and removed from the bottom side of the engine compartment.

INSTALL OR CONNECT
  1. Alternator to mounting bracket with two bolts to rear of alternator (hand tighten).
  2. Engine harness clip to cradle.
  3. Access panel to lower radiator support (4 bolts).
  4. A/C splash shield to cradle (3 bolts).
  5. Harness connector and output cable to alternator. Tighten output cable to 20 Nm (15 lbs ft) and rear mounting bolts to 47 Nm (36 lbs ft) .
  6. Bolts to lower front and front top of alternator. Tighten to 47 Nm (35 lbs ft) .
  7. Rotate drive belt tensioner and install drive belt around alternator pulley. Inspect for correct alignment of belt with all accessory pulleys.
  8. Left and right cooling fans.
  9. Upper transmission oil cooler line.
  10. Left engine torque strut.
  11. Air cleaner.
  12. Cover from headlamps and radiator shroud.
  13. Negative battery cable and tighten bolt to15 Nm (11 lbs ft) .




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.







 
 
 






Search for (options) Privacy Sitemap