|
|
kingjim9
User
Sep 3, 2010, 3:55 PM
Post #1 of 5
(6860 views)
|
|
Car door won't unlock
|
Sign In
|
|
On my 2000 Dodge Neon, i can put my key in the driver side door and it just turns freeley bud doesn't lock or unlock the door, i have to reach in through the passenger side to unlock it. (it doesn't have power locks)
A few days ago i told my buddy about it and him and I pulled the door panel & trim and he played around with some of the cables in there and it worked good until today, when it seems like it must have slipped off again.
I was wondering if anybody knew what I could do to get it to work again?
Thanks,
-Jim
|
|
| |
|
|
kingjim9
User
Sep 3, 2010, 4:38 PM
Post #2 of 5
(6847 views)
|
|
Re: Car door won't unlock
|
Sign In
|
|
UPDATE: I took off the door panel and found that the clip that goes on the inside of the door lock slipped off again, i was able to put it back on, but it looks like there should be something to hold in on to prevent it from slipping off? I wasn't able to find anything inside of the door, i was going to try using some sort of small cotter pin or small hitch pin.
Does anybody have access to a diagram to see if there is some sort of retaining nut or clip to hold this piece on?
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Sep 3, 2010, 7:46 PM
Post #3 of 5
(6842 views)
|
|
Re: Car door won't unlock
|
Sign In
|
|
I don't have a diagram handy but most of those rods have a plastic clip the end slips into. Once the end is end the whole clip rotates down & snaps onto the rest of the rod to stay in place...... (if that makes any sense)
|
|
| |
|
|
Double J
Veteran
/ Moderator
Sep 4, 2010, 1:11 PM
Post #4 of 5
(6823 views)
|
|
Re: Car door won't unlock
|
Sign In
|
|
Just fixed a friend of mines
His had an E Clip that held the rod and arm to the lock cylinder.
19 cents at Menards.
Click on above to see image
(This post was edited by Double J on Sep 4, 2010, 1:11 PM)
|
|
| |
|
|
kingjim9
User
Sep 4, 2010, 8:50 PM
Post #5 of 5
(6816 views)
|
|
Re: Car door won't unlock
|
Sign In
|
|
alright thanks for the help guys!, i ended up getting it working, it looks like there should be an E clip there since theres a little grove for something on it. i couldn't find the original E clip it had in the door, so i just used a tiny cotter pin and bent it around so it should hold pretty good.
Sidom: it does have some groves that make it fit over the lock cylinder a certain way but once it's on it doesn't rotate, but like i said i just used that cotter pin so it should prevent it from slipping off.
Again thank's for your help!
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
